Uncategorized

SeaFile is an open source file sharing platform like Dropbox. Unlike Dropbox, SeaFile can be hosted on a client machine which gives the user full control of the cloud. It also provides better security as it omits the presence of a third party cloud hosting platform.

SeaFile includes a number of features such as client-side encryption, public uploading, downloading, link sharing, antivirus integrations etc. You can read more about SeaFile here.

 

In this tutorial, we will be covering how to install SeaFile on Ubuntu 16.04. Just follow these steps and you’ll be good to go.

Prerequisite
Putty with sudo user privileges
Ubuntu 16.04 installed machine
LAMP stack installed – Refer the tutorial How to install LAMP stack on Ubuntu to install LAMP stack on the server.
Please note that this tutorial will be demonstrating through a dummy domain name or IP address.  I have decided to keep the SeaFile files on the directory www.example1.com/seafile and the seahub to run on my demo server IP address.

Before you start with installation, please make sure that the system repositories are up to date by releasing the following command.

sudo apt-get update
Installing Dependencies
The sea file installation requires the following packages to be installed on the server. If you don’t install these packages, the seafile installation will be failed

python 2.7
python-setuptools
python-imaging
python-ldap
python-mysqldb
python-urllib3
python-memcache (or python-memcached)
Please use the following commands to install the dependency package on Ubuntu 16.04

sudo apt-get install python

sudo apt-get install python2.7 libpython2.7 python-setuptools python-imaging python-ldap python-mysqldb python-memcache python-urllib3

Download Latest SeaFile Package
In this step, we will download the latest SeaFile package into our server. You can find the latest version on the official website download page. The latest version of the SeaFile is 6.0.9 by the time of writing this article and I have used it throughout this article.

Before downloading the SeaFile package, please make sure that you are in the correct directory where you want to keep the SeaFile files. Then use the following command to download the SeaFile file

wget https://bintray.com/artifact/download/seafile-org/seafile/seafile-server_6.0.9_x86-64.tar.gz
After the download complete, just use the following command to extract the SeaFile tar package on the current directory.

tar -xzf seafile-server_6.0.9_x86-64.tar.gz
Now a folder named seafile-server-6.0.9 will be created on the server with all the seafile files

Navigate to the seafile-server directory by using the following command

cd seafile-server-6.0.9
Installing Seafile on Server
There is an automatic installation script available with the SeaFile package that will simplify the SeaFile installation on the server.

The installation script can even setup databases and database users on the go if you are able to provide the MySQL root password. Else, you can create the databases and users manually and can provide the details to the installation script while it asking for the details.

I will be using the automatic creation of the databases during the installation by choosing the option 1 while the installation starts. If you have already created the databases and user for the databases, just choose the option 2 while the installation script asks for the option

Just run the setup-seafile-mysql.sh script from the seafile-server directory to begin the seafile setup

sudo ./setup-seafile-mysql.sh
Running this script will initialize the SeaFile installation on the server. Read the instructions carefully and fill the details. You can see the data used for my installation in the below script

This script will guide you to setup your SeaFile server using MySQL.
Make sure you have read SeaFile server manual at

https://github.com/haiwen/seafile/wiki

Press ENTER to continue
—————————————————————–
What is the name of the server? It will be displayed on the client.
3 – 15 letters or digits
[ server name ] LEBDemo // Type a name for Seafile Server

What is the ip or domain of the server?
For example: www.mycompany.com, 192.168.1.101
[ This server’s ip or domain ] 104.168.101.139 // I have used IP address. You can use even your domain name instead

Where do you want to put your seafile data?
Please use a volume with enough free space
[ default “/var/www/example1.com/public_html/seafile/seafile-data” ] // I have left it as default. Better to choose a directory that is different from the public directory for better security

Which port do you want to use for the seafile fileserver?
[ default “8082” ] // I have used the default port. Better to use different port

——————————————————-
Please choose a way to initialize seafile databases:
——————————————————-

[1] Create new ccnet/seafile/seahub databases
[2] Use existing ccnet/seafile/seahub databases

[ 1 or 2 ] 1 // I have choose the option to create new databases. This script will automatically create the databases for seafile. If you have created the databases already, just choose the option 2 and enter the databases details when it asks.

What is the host of mysql server?
[ default “localhost” ] // By default it is localhost

What is the port of mysql server?
[ default “3306” ] // By default it is 3306. Just press enter if you don’t have a different port number

What is the password of the mysql root user?
[ root password ] // You must provide MySQL root password for the script to create databases.

verifying password of user root … done

Enter the name for mysql user of seafile. It would be created if not exists.
[ default “seafile” ] seafileuser // Create a database user for seafile.

Enter the password for mysql user “seafileuser”:
[ password for seafileuser ] // type a password for the user created above

verifying password of user seafileuser … done

Enter the database name for ccnet-server:
[ default “ccnet-db” ] sfccnet // type a database name for ccnet-server

Enter the database name for seafile-server:
[ default “seafile-db” ] sfserver//type a database name for seafile server

Enter the database name for seahub:
[ default “seahub-db” ] sfhub //type a database name for seafhub

———————————
This is your configuration
———————————

server name: LEBDemo
server ip/domain: 104.168.101.139

seafile data dir: /var/www/example1.com/public_html/seafile/seafile-data
fileserver port: 8082

database: create new
ccnet database: sfccnet
seafile database: sfserver
seahub database: sfhub
database user: seafileuser
Please hit enter when it asks to press Enter to continue. Upon hitting enter, the script will start configuring the seafile on the server.

After the installation complete, navigate to seafile-server* directory using the following command

cd seafile-server-6.0.9
Starting the Server
Once you are on the seafile-server directory, we will run a script to initialize the server. Use the following command to initialize the seafile service

sudo ./seafile.sh start

Now, start seahub website using the following command

sudo  ./seahub.sh start 8001
Please note that I have used the port 8001. If you leave it empty the script will take the default port as 8000.

As it is the first time run of the server, it will ask you to configure the admin account for seahub. Just fill out the details to continue

Congratulations! You have successfully installed seafile on the server.

Now you can access the seahub over the URL domain.com:port or ipaddress:port

ie, I can access the seahub server on http://104.168.101.139:8001 as I have used the IP 104.168.101.139 and port 8001.

The SeaFile SeaHub dashboard will look like below

You can configure the desktop client by downloading from the official website download page and can manage the files and libraries from your local machine

*Source: HERE

I’m going to show you how you can set up Docker on your Ubuntu PC and start using it for WordPress development. Along the way, I’ll show you why you would want to do that. Then I’ll dive into the details and share step-by-step instructions.

So, why bother using Docker? After all, you could get by with a text editor and an FTP client.

That’s the approach I used when I first got into WordPress development. Back then, I would edit files on my own computer and upload them to the server. I’d do all my testing on the remote machine, on a separate WordPress installation.

While it worked, it was pretty uncomfortable. I soon got frustrated with the delays every time I wanted to test a small code change. So I was happy when I learned about WAMP.

Now I could run my LAMP stack on my Windows box, build the entire project, and then deploy it when it was done. Even then, there were some difficulties I had to work around.

For one thing, Windows and Linux have some subtle difficulties that tripped me up a few times. One obvious issue is the way they deal with file paths.

There are some features in PHP that address these differences, but it was still a pain. So my next step was to install Ubuntu on my PC. Now I could develop in a native Linux environment. In fact, I could set it up so it was virtually identical to my web server,

This was great for my own projects, but I ran into major difficulties the first time I worked for a client.

Dependency Hell

The client in question was running an old version of PHP on their server. In fact, they had old versions of everything – MySQL, Apache, Linux, the works.

Unfortunately, they couldn’t update their server software because that would break all their code. Suddenly I found myself in a situation where I couldn’t code on my Linux box and upload the code when I was done. All because the packages on my PC were up to date.

I’d just taken my first bold step into the nightmare that developers affectionately call “dependency hell”. It took me several days to come up with a workaround.

Virtualization

After some frenzied research, I realized I would have to use a combination of Virtualbox and Vagrant to recreate the conditions on the server. Virtualbox is a free tool from Oracle that allows you to run virtual machines on your computer.

This allowed me to run a separate instance of Linux alongside my native system. I could set it up just right, duplicating all the eccentricities of my client’s out of date server.

Vagrant is a great tool that simplifies the process of running multiple VM versions.

Even then, it wasn’t easy. The version of PHP on the client’s box was so long in the tooth that it wasn’t available in any of the repositories. Instead, I had to track down the old source code and compile it from scratch. And that meant tracking down outdated versions of every library used by PHP. All-in-all, I spent 5 days setting up the environment so I could reach square zero.

Nonetheless, once I finally got things set up, the rest of the job was smooth sailing. And from that point on, Vagrant and Virtualbox became my indispensable web dev buddies.

That is until Docker appeared on the scene.

Why Docker?

So, why should you use docker? After all, virtual machines offer all the advantages I mentioned above. Of course, one reason why you may feel tempted is because of the popularity.

After all, much as we may try to deny it, every profession is prone to following trends. We all want to do what the “cool kids” are doing, and web developers are not immune.

Docker has grown to be one of the most popular open source projects over the last few years, so it certainly has popularity going for it. But there are very real reasons for that popularity.

Let’s examine some of these:

Less Overhead

Running a virtual machine gives you ultimate control over your development environment. But that control comes at a cost – running a second OS inside your host OS requires plenty of resources. A virtual machine has all the requirements of a physical one. It demands processor time, memory, disk space, and so on.

A modern OS is quite a big beast, and Linux is no different. After all, it’s designed to run in many different conditions, and deal with every requirement a user could have.

Docker isn’t a virtual machine. It doesn’t create a “pretend computer” that attaches itself to your PC, leaching the resources and slowing your machine to a crawl. Instead, it uses clever tricks to execute your apps and dependencies through the existing Linux kernel – the one that started when you booted your Ubuntu machine.

So the performance is much better. Your machine is under less strain, and so applications run fast – that includes the code you are working on as well as your regular apps outside the container.

Working on a responsive machine is much nicer than struggling with an unresponsive PC. And it’s better for your productivity, too.

Packaging

Docker wraps your app into a single object which you can deploy as a complete entity. All your dependencies, settings, and configurations are neatly bundled into a single package that you can deploy to any platform capable of running Docker.

This immediately reduces the headaches of deployment, which can be considerable. Hours (or even days) can be wasted fine tuning your production and development environments to get your application running right.

In a worst case scenario, you may find a new application is completely incompatible with essential apps that are already running on the server. In that case, you have to spend days or even weeks tweaking your new app to run on the production machine.

Of course, this is more of an issue for developers working on custom apps – WordPress tends to lower the integration headaches by providing a relatively stable platform to develop on.

For instance, a relatively simple unambitious plugin or theme should work with most versions of WordPress, as the WordPress API is quite reliable. But then again, how many real-world projects are “relatively simple”?

In reality, you’ll come to love Docker for reducing the pain of deployment.

Application-Oriented

As I mentioned, there are plenty of existing solutions for virtualization. These well-known and battle-tested projects have been a mainstay of IT departments for years now. But they are mostly server-oriented. They’re designed for their primary users – server administrators who deal with multiple physical boxes.

That’s why these projects are geared towards provisioning. They automate the manual tasks a server admin would have to do by hand when they set up a new server environment.

As developers, we have different priorities. For us, the application is the most important component. The rest of the server architecture is something we would rather take for granted.

With more traditional server provisioning tools (such as Puppet) we would inherit a large mass of overhead that we don’t need or want. Docker does away with this added complexity by focusing our attention on the job at hand – developing our applications.

Version Tracking

Any developer with more than a couple of projects under their belt knows the value of version tracking. Before the age of version control systems, keeping track of different versions of source code files was a major pain.

Development is an evolutionary process. As we code new features and fix bugs, we constantly change the codebase we are working on. Change is good, but it’s also a source of all kinds of problems. Fixing one bug often adds two or three additional ones. And they aren’t always immediately apparent.

Tracking down which change caused a specific bug can be hard for a single developer. When a team is working on the project, the problem can be magnified by several orders of magnitude.

That’s why git is such an indispensable tool, for single developers and teams alike.

Version tracking is essential for individual source code files. And it’s essential for different versions of your themes and plugins, too. That’s why Docker’s built-in version tracking is a Good Thing.

Public Registry

I’m sure I don’t have to convince you how valuable open-source development is. As a WordPress developer, you gain a massive head start by building on the work of others. Every component in your stack is a complex piece of software that you don’t have to code yourself.

Docker’s registry makes it easier to share code with the community – and to benefit from the work other developers have made available!

What’s more, you aren’t just sharing code snippets or individual files – you can download complete micro-services and even complete WordPress installations. This gets you off to a running start the next time you begin a project.

This is just a small taste of the many benefits that docker brings to the table. While I could go on and spend the rest of this article listing the virtues of Docker, I think you get the point.

So, let’s look at how you can get started

Installing Docker

One of the virtues of using Ubuntu as a development platform is the ease of installing popular packages. And Docker is certainly a popular package!

As long as your machine is connected to the Internet, you can install Docker with a few apt-get commands in the terminal.

But, before you do that, it’s worth doing a little housekeeping.

First, let’s ensure your system meets the minimum requirements. Docker only works on 64 bit systems. And it requires Linux kernel version 3.10 or later. You can check the kernel version in a terminal by typing:

uname -r

The first few digits are the version number – as long as it’s 3.10 or greater, you’re good to go.

The next step is to update your PC’s list of repositories, so it can fetch the latest and most stable versions of the packages you will be installing. You can do this with a single terminal command:

sudo apt-get update

The screen will fill with a bunch of text as APT fetches up-to-date package lists from its repositories. It usually only takes a few seconds.

Next, you have to ensure that APT can install packages over https, using CA certificates. You can install these features with:

sudo apt-get install apt-transport-https ca-certificates

This could take a few minutes depending on how many packages APT has to install.

The next step is to install the GPG key. GPG stands for Gnu Privacy Guard – this is the system that APT will use to decrypt the Docker packages and ensure they are legitimate.

Type the following into the terminal:

sudo apt-key adv --keyserver hkp://p80.pool.sks-keyservers.net:80 --recv-keys 58118E89F3A912897C070ADBF76221572C52609D

The next step is to add the Docker repo to APT. You do this by editing or creating a file under /etc/apt/sources.list.d/docker.list

The file is a single line, which contains the address of the repo. You have to enter the correct address for the version of Ubuntu you are using – in our case, we’ll be using the repo for Ubuntu 16.04.

Type the following lines into your terminal:

sudo -i

echo "deb https://apt.dockerproject.org/repo ubuntu-xenial main" > /etc/apt/sources.list.d/docker.list

exit

Now you have to update APT’s repo list again, with:

sudo apt-get update

If you had previously installed an old version of docker, you’ll have to purge it with:

sudo apt-get purge lxc-docker

Now let’s check that APT is pulling from the correct repo with:

apt-cache policy docker-engine

You should see a list of packages for Ubuntu Xenial.

Now you can install Docker’s dependancies. Type:

sudo apt-get install linux-image-extra-$(uname -r) linux-image-extra-virtual

This will install the appropriate Linux image extras package for your kernel version.

Ubuntu 16.04 and above already have most of the other dependencies for Docker. If you’re using an older version of Ubuntu, you’ll have to install the other dependencies manually. You can find a list at:

https://docs.docker.com/engine/installation/linux/ubuntulinux/

Finally, we’re ready to install Docker! All you have to do is type:

sudo apt-get install docker-engine

Sit back and let APT do its magic. If APT runs into any problems (such as missing dependencies) it will give you a helpful description of what went wrong. If you have any missing dependencies in the list, you’ll have to install them one by one using sudo apt-get install.

You may have to reboot your machine after installing these dependencies, especially if they included a new Linux kernel.

As soon as APT finishes the installation, you can start the docker daemon:

sudo service docker start

Finally, test it with:

sudo docker run hello-world

This will run a test container and print a simple message to the terminal.

So, you have Docker installed. The next step is to install Docker Compose. Docker compose is a useful tool for running docker applications, and it simplifies your workflow. It also allows you to compose applications from multiple containers that communicate with each other. This is called a micro-service architecture – but that’s beyond the scope of today’s article.

Docker Compose isn’t in the regular Ubuntu repos, so you’ll have to install it from the GitHub repository. The exact installation instructions vary with each new release, so you should check them out at https://github.com/docker/compose/releases

Here are the steps I followed as I was writing this article:

sudo -i

curl -L https://github.com/docker/compose/releases/download/1.8.1/docker-compose-`uname -s`-`uname -m` > /usr/local/bin/docker-compose

chmod +x /usr/local/bin/docker-compose

exit

Now, let’s set up a WordPress environment. Previously, I told you that one of the benefits of Docker is the way other users share their environments to speed up your development work.

There are plenty of WordPress containers you can choose – the one I picked for this article is from visible.vc. They’ve shared it on GitHub, so you can quickly clone the project to your computer:

git clone https://github.com/visiblevc/wordpress-starter your-project-name

cd your-project-name

Now all you have to do is run the container in Docker:

docker-compose up

Docker Compose will download the docker image and start running it. It will take care of all the dependencies, from the MySQL database to the Akismet WordPress plugin.

And there you have it – your own fresh WordPress install, running on localhost:8080.

Using Your WordPress Container

Right now, we have a bare-bones WordPress installation. You probably intend to do more.

So the next step is to start sharing directories between your PC and the Docker package. This allows you to edit the files on your machine, and run them in the package.

You can control the directory sharing from the docker-compose.yml file. This is a simple YAML file that contains all the settings you need. YAML is a lightweight human readable data format, so you’ll have no difficulty getting to grips with it.

Open it up in your favorite editor, and turn your attention to the “volumes” section at the end. Right now it says:
data: {}

We want to change that to share directories from the project. You should already have a directory containing a starter theme in the ./wp-content/themes/the-theme directory. You might want to rename that later, but for now, let’s use it as it is.

Replace the contents of the volumes section with:

- ./data:/data
- ./wp-content/themes/the-theme:/app/wp-content/themes/the-theme

Inside the container, the directory appears as /app/wp-content/themes/the-theme. WordPress sees this as one of the installed themes, and you can use it in the normal way.

You can also setup the WordPress database to your likings by editing the contents of /data/database.sql before you run docker-compose up. You can also use the WP Migrate DB plugin, just like you would with any other working WordPress installation.

There are more instructions for this container at https://github.com/visiblevc/wordpress-starter.

Conclusion

So, you’ve learned why you should use Docker, and you’ve set up your first WordPress development container. You’ve taken your first steps towards a more streamlined and stable workflow! There is more to learn about Docker, but you know enough to get started on your first project. Happy coding!

 

source: HERE

In order to migrate the files on a VPS box from one provider to another, one of the best solutions for the job is to use a tool called Rsync.

Let’s take a closer look at Rsync and see how it can help you rapidly move virtual private servers from one provider to another.

About Rsync

Rsync is one of the most common ways to copy/backup/restore files and folders between two locations, regardless if these endpoints are local or remote servers.

It supports compression, encryption and incremental transfer which makes the app an extremely versatile and useful tool for systems administrators.

Note: Running Rsync does not require you to be logged in as root.

Since Rsync supports incremental file transfer, the first time you will run it, it will require the same time to copy all the files as any other command However, when you subsequently execute Rsync, it will determines which changes have been made and only transfers those files.

This mechanism is designed to save time for the system admin, load and bandwidth.
Getting Acquainted with Rsync

Let’s get started and copy our live running server in a new location in 5 easy steps.

Step 1) Ensure that your OS is in Place

In order to migrate your server to a new location, the first step is to install your operating system onto new infrastructure. You can determine what architecture your current server is running on with the following command:

uname –a

You will want to use a Linux distro and kernel as close as possible to the one installed on server you are migrating.

Most VPS providers will set this up for you when you buy your new VPS server.

Tip: You may only need to do this step if you are building out a server locally. Hypervisors such as VMware help administrators streamline the process of installing operating systems onto hardware.

Step 2) Check the connection between the 2 servers

Once you have the two systems up and running you will need to check to see if it will be possible to make a connection between the two servers.

You can easily do that with the command “ssh”. Assuming you are running SSH from the new server and trying to connect to the old one, if the old server asks for the password, you passed the test!

ssh user@oldserver

Step 3) Check Rsync

At this point you will have to verify that Rsync is installed on both systems and if not, it’s time to install it. You can check if the command is present in the following way:

which rsync

In case the tool should not be present, you can easily install it using the following commands:

apt-get install rsync (on Ubunbu based distros)
yum install rsync (on CentOS based distros)

Step 4) Prepare the Exclude List

You will now only need to decide which directories to exclude. This may vary from system to system, but I would never suggest you to include the following unless differently needed:

/etc/fstab
/etc/sysconfig/network-scripts/* (CentOS distros)
/etc/network/* (Ubuntu distros)
/proc/*
/tmp/*
/sys/*
/dev/*
/mnt/*
/boot/*

Step 5) Run Rsync

Some VPS administrators may be worried about running Rsync while a MySQL instance running.

In most cases, this won’t present a problem. You might consider running it outside of heavy load periods if your server is hosting a live system, but other than that you should not have any problems.

Of course you will not have a consistent copy of the DB unless you stop the service before beginning Rsync, so please keep that in mind.

In this instance, Rsync will create a copy and it will allow you to test the system on the new server, which is usually always a big plus.

An Example of Rsync at Work

Assuming you are logged into the destination server, you’d implement a command that looks like this:

rsync -auHxv –numeric-ids –exclude=/etc/fstab –exclude=/etc/network/* –exclude=/proc/* –exclude=/tmp/* –exclude=/sys/* –exclude=/dev/* –exclude=/mnt/* –exclude=/boot/* –exclude=/root/* root@SRC-IP:/* /

Once it finishes, simply reboot your destination server and you will notice that you will have a precise copy of the files located on your source VPS.

*source: HERE